Number Plate Holder PLEXICLICK® V1.3D UK

The PLEXICLICK® V1.3D UK is a frameless number plate holder made up of two clips per plate. The clips are screwed to your car, then you place the number plate in at the bottom and push it upwards until it audibly clicks into place – hence the name. From the front, all you see is the number plate itself: no surround, no dealer advertising. This version is designed for 3 mm acrylic number plates with a height of 110 mm.

Frameless, invisible, advert-free – the difference

Conventional number plate surrounds frame your plate and usually carry the dealer's branding. The PLEXICLICK® V1.3D UK, on the other hand, disappears behind the plate. Unlike sticky pads, Velcro or magnetic holders, the clips are screwed firmly in place – nothing slips, nothing comes loose.

Frameless: no surround, nothing to spoil the look of the front or rear
Advert-free: no dealer branding on your car
Also fits short plates: the clips can be positioned freely
No drilling: uses the existing mounting points on your car
Shatter-resistant plastic: stable, durable, impact-resistant
Made in Germany: developed and manufactured in Germany

Fit: for 3 mm acrylic number plates, 110 mm high

This version of PLEXICLICK® is designed for 3 mm thick acrylic number plates with a measured height of 110 mm. Because the clips are positioned individually, the holder also works with short number plates.

Not sure? Measure the full height of your number plate in several places with a ruler or tape measure – or take a look at our size guide.

View the number plate holder size guide

Fitted in minutes – no drilling

All you need is a standard Phillips screwdriver. An illustrated fitting guide is included with every set.

Remove your old number plate holder and clean the mounting surface.
Screw the PLEXICLICK® clips to your car using the screws supplied – via the existing mounting points, set closer together for short plates.
Optional: stick the anti-rattle pads onto the centre block – this reduces rattling and rub marks.
Place the number plate in at the bottom and click it in at the top – the audible click tells you it is securely in place.

What's in the box – PLEXICLICK® V1.3D UK

4x PLEXICLICK® V1.3D UK clips – enough for two number plates (front and rear)
8x Phillips screws
4x anti-rattle pads against rattling and rub marks
1x detailed, illustrated fitting guide

Made in Germany. Tool required: standard Phillips screwdriver (not included).

Clear or black – which suits your car?

Clear: discreet and almost invisible, suits any paint colour.
Black: adds a subtle contrast and blends in particularly well with dark front and rear ends.

Technical details

Colours	Clear, black
Suitable for	3 mm acrylic number plates, 110 mm high
Plate formats	Standard and short number plates
Vehicle type	Cars
Fixing	Clips screwed on, number plate clicks in – no drilling
In the box	4x clips, 8x screws, 4x anti-rattle pads, fitting guide
Manufacturing	Made in Germany

Frequently asked questions

How do I check whether my number plate fits?

Measure the full height of the number plate with a ruler or tape measure in several places – not the height of the characters or the border. The PLEXICLICK® V1.3D UK is designed for 3 mm acrylic plates 110 mm high. The plate must be undamaged and not bent, otherwise the measurement won't be reliable.

Do I need to drill any holes?

No. The PLEXICLICK® V1.3D UK is screwed on using the mounting points already on your car. No extra holes are needed.

Does it fit short number plates?

Yes. Because the clips are positioned individually, they can be adjusted to the width of your number plate – including short plates.

How do I remove the number plate again?

Press the top clips back one after the other with both thumbs while pushing the number plate forwards. This releases the plate from the holder without having to remove the holder itself.

Is one set enough for two number plates?

Yes. The set with 4 clips is designed for fitting two number plates – front and rear.